Patented Inertia Active dampening for damper rod front forks. This is the only product on the market that is smart enough to differentiate between the wheel or the chassis moving.

We give you the best of both worlds, a more stable chassis and a faster wheel response over bumps. This product will transform the front of your bike. The Intiminator sits on top of your stock damper rod forcing the oil through high quality deflected discs found in top of the line shock absorbers. When the front tire hits a bump then the inertia of that bump opens the inertia valve instantly allowing for a faster response.

Installation is easy. Drain the fork oil, remove the spring, drop in the Intiminator, add oil, then the spring and away you go.

• The Intiminators add 13.8mm (13.9mm 92 on)of preload to the forks. For the same pre-Intiminator preload reduce the length of the fork spacer by 13.8mm (13.9mm 92 on).


• On installation, fill the forks with fluid to just over the top of the damper rod tube, use the fork spring to push the Intiminator down on to the damper rod tube, remove the spring and top up the fluid to the correct level.


• The Intiminators were developed using Amsoil fork fluid. To experience the full benefit of your Intiminators we recommend sticking to this brand. We tested the Intiminators with another leading brand 5w synthetic fork fluid, this produced damping that was more harsh than with the Amsoil. Not all 5w synthetic fork fluids are created equal.